liki liki design | lighting control products

light drive elite

The light-drive elite is a wall-mounted standalone DMX controller and interactive user interface for dynamic lighting.

End-users can easily setup color changing effects and control lighting directly using the device. The user interface features touch-sensitive keys and wheel with color LEDs for intuitive selection of colors and adjustment of intensity and speed. Memory function allows end-users to define four colors for color-changing effects. It can be easily connected to LED RGB fixtures through an RJ-45 connection for power and data. The light-drive elite is also fitted with an infra-red sensor, enabling remote control.

The interface white or black glassy finish is designed for an elegant appearance as well as easy maintenance.

glass touch t6

The glass touch t6 offers 6 buttons + on/off via touch-sensitive zones on the unit, which are located behind a smooth glass (80x80x11mm) surface.

The touch sensitive areas allow a sophisticated control for stand-alone application and the complete e:cue system. The buttons can be individually configured to execute any desired function. In such a configuration program executions can be mapped to the interface in any order for complex scenarios.

The glass touch terminals are also outfitted with an infra-red sensor, enabling remote control. Optical status is provided via 7 red LED indicators.

glass touch t6r

The glass touch t6r has an integrated touch wheel in addition to the 6 buttons + on/off touch-sensitive zones on the unit, all of which are fit behind a smooth glass (160x80x11 mm) surface.

The touch wheel is ideal for dimming, adjusting color and speeds or any function with multiple adjustments. The touch sensitive areas allow a sophisticated control for stand-alone application and the complete e:cue system. The buttons can be individually configured to execute any desired function. In such a configuration program executions can be mapped to the interface in any order for complex scenarios.

The glass touch terminals are also outfitted with an infra-red sensor, enabling remote control. Optical status is provided via 7 red LED indicators.

glass touch t12

The glass touch t12 has 12 buttons + on/off via touch-sensitive zones on the unit, which are located behind a smooth glass (160x80x11 mm) surface.

The touch sensitive areas allow a sophisticated control for stand-alone application and the complete e:cue system. The buttons can be individually configured to execute any desired function. In such a configuration program executions can be mapped to the interface in any order for complex scenarios.

The glass touch terminals are also fitted with an infra-red sensor, enabling remote control. Optical status is provided via 13 red LED indicators.

butler

The e:cue butler is an Ethernet-based replay unit with two 512 DMX channels and an exchangeable SD-Card memory.

Enabled for both live and standalone control, the butler allows control of any show "size". In standalone mode a total of 99 shows can be recalled by either touch or remote control.

For multi-DMX-universe installations, the butler can be linked and synchronized via Ethernet and be stored in a 19" rackmount Garage.

butler xt

The e:cue butler xt is the new expanded variant of the butler DMX replay unit.

The features and versatile connectivity of the butler xt, combined with the seamless integration into the e:cue lighting application suite software, provide solutions for all kinds of DMX control scenarios. The butler xt works also as a gateway between the e:cue network backbone and the cutting edge glass touch user terminal series. The butler xt`s features list is extensive: 1024 DMX channels output, microSD card memory for up to 99 cuelists, independent, stepless dimming of each DMX output and a lot more. All this offers near infinite possibilities for all stand-alone lighting control requests.

The 8 digital inputs, a RS-232 serial port, and built-in infrared receiver provide additional connectivity to third party systems and networks.

dmx to dali

The e:cue DMX2DALI converter allows the integration of DALI/DSI dimming devices in DMX controlled lighting installations.

Its 6 outputs provide single channel user selectable DALI or DSI signals derived from 6 consecutive DMX channels for up to 96 dimming ballasts. The DMX2DALI features include automatic or manual DMX addressing modes, CAT5 or loose wiring in a DIN rail system housing.

The device is optimized for performance in a building automation environment while its compact form supports easy and intuitive setup in any lighting installation.

dmx to knx/eib

The e:cue connect EIB converter is an universal EIB/KNX gateway for the integration of EIB sensors into DMX controlled lighting installations.

This technological combination unites the best of both worlds: EIB as a stable and widespread building automation system for an extensive range of applications and e:cue's lighting control system. The interactive elements provide an amazing dynamic and variety.

This interface allows for complex scenarios involving the combination of shutters/blinds or climate control with lighting control.

dmx to pwm

The e:cue DMX2PWM PWM LED dimmer is a 9 Channel DIN Rail mounted dimmer for use with constant voltage fixtures.

The input voltage is variable from 12-48V DC and each output channel has a maximum output current of 2 A. Every output channel can be individually controlled via DMX and the DMX output allows the chaining of multiple devices.

The option to either manually or automatically address the dimmer to a DMX Channel provides a simple solution for small to complex control scenarios.